ISOGEN and I-Configure Technical Notes

ISOGEN is the "defacto" standard for Isometric Creation and I-Configure is used to set up the ISOGEN processor. With thousands of options, the below Technical Notes provide some insight into some of the settings.

How to backup and share your I-Configure Style
Issue: You need to share your I-Configure settings. If you are struggling with an I-Configure ISOGEN style and need to send it to the ECE Sup...
Tue, Nov 17, 2015 at 9:56 AM
Weld dot sizes on iso's
If you would like to increase the size of weld dot's on your isometric drawings, here is how: Check your definitions in Iconfigure.  I...
Tue, Jun 26, 2018 at 2:09 PM
How to Suppress Bolt Lengths in ISOGEN
Issue: I run my isos and my bolts have their length automatically appended to the long description. (4) STUD BOLTS W/ NUTS, 3 3/8" LG,...
Tue, Sep 8, 2015 at 5:16 PM
Where are my I-Configure help files?
Issue: You have installed CADWorx 2015 and your Isogen_Utils directory is gone. Solution: In Windows Explorer, navigate to: C:\CADWor...
Tue, Sep 8, 2015 at 5:15 PM
ISOGEN Path is too long
Issue: You receive a similar error at the command prompt: ISOGEN directory names are limited to 80 characters. ISOGEN file paths are lim...
Mon, Sep 28, 2015 at 12:34 PM
ISOGEN - Bolt Size and Length on Isometric Bill of Material
Listing Bolts on the Isometric Bill of Material is straight forward like any other part.  However, if you want to have the Bolt Size and Bolt Length show up...
Thu, Aug 27, 2015 at 12:22 PM
How to use a custom SKEY (ASC) file in I-Configure 2014
Issue: You have created a custom SKEY file and you now want your ISOGEN style to read it. Solution: After selecting your style and entering t...
Tue, Sep 8, 2015 at 5:14 PM
How to use a custom SKEY (ASC) file in Project Manager
Issue: You have created a custom SKEY file and you now want your ISOGEN style to read it. Solution: In Poject Manager follow the steps below:...
Tue, Sep 8, 2015 at 5:14 PM
How to use a custom SKEY (ASC) file in I-Configure 2012
Issue: You have created a custom SKEY file and you now want your ISOGEN style to read it. Solution: Select your Style Choose the Detail Ta...
Tue, Sep 8, 2015 at 5:13 PM
How to Merge Two or More SKEY (ASC) files
Issue: You have multiple ISOGEN ASC files and you need to merge them into one. Solution: Navigate to and Open the Symbol Editor ...
Tue, Sep 8, 2015 at 5:13 PM
How to report Trademark or CopyRight Violations