Issue:

You are missing a valve size in your specification, but need one in the model.

Solution:

You will need to add the valve to your catalog and specification.

  1. Open your specification and find the data table you will be modifying. If you do not have a data table you will need to create one.

17SE_HowToAddValveToSpec01.png


  1. Open your catalog and navigate to and open the data table we are adding a size to.

17SE_HowToAddValveToSpec02.png


  1. Right Click Add Main Size

17SE_HowToAddValveToSpec03.png


  1. Select the Size you want

17SE_HowToAddValveToSpec04.png

  1. Enter your dimensional data from your manufacturer’s data sheet.

17SE_HowToAddValveToSpec05.png

  1. Save your Catalog and Sync your Catalog

17SE_HowToAddValveToSpec06a.png


17SE_HowToAddValveToSpec06b.png


17SE_HowToAddValveToSpec06c.png


17SE_HowToAddValveToSpec06d.png

  1. Add the size to your specification

17SE_HowToAddValveToSpec07.png

  1. Save and reload this prj into CADWorx Plant


In the Below Video we walk through the process.

https://vimeo.com/212918876




Notes:

Ensure you gather all appropriate dimensional information from your manufacturer's data sheets.

Versions: 

CADWorx Plant Professional 2013, CADWorx Plant Professional 2014, CADWorx Plant Professional 2015, CADWorx Plant Professional 2016, CADWorx Plant Professional 2017