INTERGRAPH ANALYSIS PRODUCT NETWORK LOCK (RED KEY) UPDATE INSTRUCTIONS

***UPDATE MUST BE PERFORMED WITHIN 7 DAYS***  

  • Remove your RED USB Dongle from the server and plug it into an Intergraph Analysis or Non-Analysis machine.  
  • Ensure the lock is lit up.  
  • Save the MM4 file you received to the desktop.
  • Run the update utility as directed below:  
    • If updating on a Non-Analysis download esl_image.  
    • For PV Elite users continue to C:\Program Files (x86)\Intergraph CAS\PVElite 20XX\Assidrv and run esl_image.exe.
    • For Caesar II users continue to C:\Program Files (x86)\Intergraph CAS\CAESAR II 20XX\Assidrv and run esl_image.exe.
  • Once you have the update utility opened up you can select Browse and navigate to your desktop to select the MM4 file.

  • When the MM4 file is loaded into the update utility the first two check boxes under status should be checked.
  • Click OK to update your key.  
  • Now all three check boxes should be checked.
    • Close out of the utility by selecting the "X" in the upper right hand corner.
      • If there are any errors or issues contact us at support@ecedesign.com
  • Next, confirm your version.
    • For Caesar II the max version for 2016 Max Version is 1215 and for 2017 max version is 1216

    • For PV Elite the max version for 2016 is 1216 and for 2017 max version is 1217

    • Run the pulse utility as directed below:  
      • If using a Non-Analysis download the pulse utility.  
      • For PV Elite users continue to C:\Program Files (x86)\Intergraph CAS\PVElite 20XX\Assidrv and run pulse.exe.
      • For Caesar II users continue to C:\Program Files (x86)\Intergraph CAS\CAESAR II 20XX\Assidrv and run pulse.exe.
    • Select Show ESL Data.

  • At the bottom of the screen select Log File.
    • After selecting Log File the dialog box above the buttons with the path to where the file was written.
    • Follow the path and send the log file to orders@ecedesign.com.

  • You can now plug your RED usb key back into the server.